55 Sending Faxes
5Specify the fax number of the recipient.
" Refer to “Specifying a Recipient” on page 45.
" To send a broadcast transmission to multiple destinations, refer to “Send-
ing a Fax to Multiple Recipients (Broadcast Transmission)” on page49.
6Press the Start key to begin scanning and sending the fax.
" To stop the transmission, press the Stop/Reset key. A message appears,
requesting confirmation to cancel the setting. Select YES, and then press
theEnter key.
" The transmission method returns to the default setting after the document
is scanned with a normal transmission or after transmission with a manual
transmission. It is useful if the most frequently used transmission method
is selected as the default. For details, refer to “FAX TX OPERATION” on
page30.
Sending a Fax Manually
Sending a Fax Manually After Using the Telephone
If the machine is connected to a telephone and the same line is used for both
phoning and faxing, the document can simply be sent after talking with the recip-
ient over the phone.
This is useful, for example, if you want to tell the recipient that you are sending a
fax.
" Manual transmission cannot be used together with duplex (double-sided)
document transmission.
1Load the document into the ADF.
" When sending a fax manually, load the document into the ADF. An error
will occur if the document is placed on the original glass.
" For details on loading the document into the ADF, refer to “Sending a Fax
Using the ADF” on page 40.
2If desired, adjust the image quality.
" The document image quality can be adjusted. For details, refer to “Adjust-
ing the Image Quality” on page 44.
3Pick up the handset and check that the dial tone can be heard.