56 Sending Faxes
4Specify the fax number of the recipient by using the telephone to dial the fax
number.
" The fax number of the recipient can also specified using the keypad in the
control panel of this machine.
" If Pulse is selected as the telephone line type, press the key to tempo-
rarily change the line type to Tone.
5After finishing talking on the phone, the recipient should press the necessary
key to start receiving the fax.
Once the recipient’s fax machine is ready, a beep is sounded.
6Press the Start key to begin scanning and sending the fax.
7Replace the handset to its cradle.
" To stop the transmission, press the Stop/Reset key. A message appears,
requesting confirmation to cancel the setting. Select YES, and then press
theEnter key.
Sending a Fax Manually Using the ON HOOK Key
" Manual transmission cannot be used together with duplex (double-sided)
document transmission.
1Load the document into the ADF.
" When sending a fax manually, load the document into the ADF. An error
will occur if the document is placed on the original glass.
" For details on loading the document into the ADF, refer to “Sending a Fax
Using the ADF” on page 40.
2If desired, adjust the image quality.
" The document image quality can be adjusted. For details, refer to “Adjust-
ing the Image Quality” on page 44.
3Press the On hook key.
4Specify the fax number of the recipient.
" The keys for registered destinations can be used even if the On hook key
has been pressed. For details, refer to “Specifying a Recipient” on
page45. (Group dial destinati ons cann ot be specified.)
" If Pulse is selected as the telephone line type, press the key to tempo-
rarily change the line type to Tone.