APPENDIX D – SETTING UP
Although your Scancopier (and optional ADF) will have been fully installed by an Installation Engineer, you may require to resite the Scancopier or fit an ADF at a later date or change your user default settings. In such events, you should read the relevant sections of the following information.
RESITING THE SCANCOPIER
CAUTION!
Before moving the Scancopier you must remove the power from it, lock the scanning head and disconnect any cables that may be attached to it.
LOCKING THE SCANNING HEAD
1.Turn the power off the Scancopier.
1
2.If the scanning head is not located at its home position (1), turn the Scancopier on to return the scanning head to position
(1).
3.After the scanning head is returned to the home position, turn the Scancopier off.
APPENDIX D – SETTING UP > 65
