Olevia 265T FHD manual Connecting to a DVD Player with A/V or S Video Cables

TV Installation and Connection Guide

Connecting to a DVD Player with A/V or S Video Cables

Disconnect all power sources before making any connections.

Use this method of connection if your DVD player does not have component (Y, Pb, Pr) jacks.

Note: If your DVD player has component video output connectors, for best picture quality, use the connection described for Connecting to a DVD Player with Component Connectors.(See page.17)

1.Using an A/V cable, connect the DVD player's Audio OUT jacks to the TV's Audio IN jacks. 2.Using an S-Video Cable, connect the DVD player's S Video OUT jack to the TV's S Video IN jack.

For 265 TFHD Model

Rear of TV

DVD Player

A/V cable with

RCA connector

Yellow

White

Red

S Video cable

English

Note: When you connect video equipment to both the same Video and S-Video input jacks, the display will automatically select S-Video first.

To view Video signal, please disconnect the S-Video jack or turn off the Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has the option. S-Video input has better quality of picture than a composite Video signal.

18