Olevia 265T FHD manual Connecting to a PC with VGA Connector

TV Installation and Connection Guide

Connecting to a Blue-Ray DVD Player

or HD-Receiver with HDMI Cables

Disconnect all power sources before making any connections.

For 265 TFHD Model

English

1.Using a HDMI cable, connect the DVD's HDMI output terminal to the TV's HDMI-HDCP input terminal.

Note: HDCP is a copy protected digital connection that receives analog or digital video and audio signals from equipment with a HDMI output that features the HDCP function. HDMI allows the transfer of digital uncompressed data to the TV. This connection is superior when compared to the Component, S Video or AV (composite) connections.

Rear of TV

HDMI 1

RL

HDMI 2

RL

HDMI cable

Blue-Ray DVD Player / HD-Receiver

Note: HDMI signal is purely digital and provides a better picture, it is better than component, S-Video or Video connections. It is strongly recommended to use this connection if you have this function on your equipment.

Connecting to a PC with VGA

Connector

VGA / RS232C

Component 3 Control Port

RL

Firmware

Upgrade Port

Disconnect all power sources before making any connections.

1.Using a D-Sub 15 pin cable, connect the VGA output terminal of the PC to the TV's VGA signal input terminal. 2.You may need to use a Stereo mini jack to Audio in connectors to receive audio.

For 265 TFHD Model

Rear of TV

H D M I 1

RL

H D M I 2

RL

VGA / RS232C

Component 3 Control Port

RL

Firmware

Upgrade Port

PC

D-sub 15 pin cable

White

Audio cable

Red

23