Olevia 265T FHD manual Rear of TV

TV Installation and Connection Guide

Connecting to a Set-Top-Box with HDMI Cables (Preferred TV connection)

Disconnect all power sources before making any connection.

1.Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the Set-Top-Box's Antenna jack (RF Terminal).

2.Connect a HDMI cable from the Set-Top-Box's HDMI OUT jacks to the TV's HDMI IN jacks.

For 265 TFHD Model

2

Cable/ Satellite

HDMI cable

1

(75-ohm coaxial cable)

Set-Top-Box

	Rear of TV
HDMI 1
R	L
HDMI 2
R	L
VGA /	RS232C
Component 3 Control Port
R	L
	Firmware
	Upgrade Port

English

Note: HDCP is a copy protected digital connection that receives analog or digital video and audio signals from equipment with a HDMI output that features the HDCP function. HDMI allows the transfer of digital uncompressed data to the TV. This connection is superior when compared to the Component, S Video or AV (composite) connections.

Note: HDMI signal is purely digital and provides a better picture, it is better than component, S-Video or Video connections. It is strongly recommended to use this connection if you have this function on your equipment.

16