Olevia 265T FHD manual English

English

TV Installation and Connection Guide

Connecting to a Satellite Receiver or Cable Box with A/V Connectors

Disconnect all power sources before making any connections.

1.Connect a 75-ohm coaxial cable from your Cable TV to the Satellite Receiver's or Cable Box's Ant (Antenna) jack.

2.Using Audio and S Video cables, connect the satellite receiver's Audio and S-Video OUT jacks to the TV Audio and S Video IN jacks.

For 265 TFHD Model

Satellite Receiver or Cable Box

1

(75-ohm
coaxial cable)	Rear of TV

A/V cable with

RCA connector

Yellow

White

Red

2

S Video cable

Note: When you connect video equipment to both the same Video and S-Video input jacks, display will automatically select S Video first.

To view S-Video signal, please disconnect Video jack or turn off the Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has it because S-Video input has better quality of picture than a composite Video signal.

21