Olympus DM-3, DM-5 manual Connect to the USB connecting AC adapter optional to charge

Connect to the USB connecting AC adapter (optional) to charge

It can be charged by connecting to the USB connecting AC adapter (A514) (optional). Before connecting the AC adapter, switch the USB Connection setting to [AC] (☞ P.77).

1Plug the AC adapter into AC outlet.

2Plug the recorder’s USB connecting cable into the AC adapter.

3Make sure that the recorder is turned off, connect the USB cable to the connecting terminal on the bottom of this recorder.

•Charging has star ted when LED indicator light is orange and the battery indicator on the display changes to the charging indicator.

Notes

•The recorder cannot be charged when the PC is not turned on. Also, it may not be charged when the PC is not switched on, or when it is in the standby, hibernate or sleep mode.

•Do not charge the recorder with the USB hub connected.

•Charging is completed when battery indication becomes [<] (charging time: approximately 3 hours *).

*It shows the approximate time when charging the rechargeable battery fully from no remaining power at the room temperature. The charging time will be changed depending on the remaining amount and the state of battery.

•You cannot charge when [;]*1 or [=]*2 is displayed. Charge the battery at the temperature from 5°C to 35°C (41°F to 95°F). *1 [;]: When surrounding temperature is

low.

*2 [=]: When surrounding temperature is high.

•When using time becomes notably short even after the battery are fully charged, replace them with new ones.

•Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.

•Be sure to use the attached dedicated cable for the USB connection cable. If any other company’s cable is used, it may cause problems. Also, please do not connect this dedicated cable to any other company’s product.