![](/images/new-backgrounds/1317866/31786611x1.webp)
Before you begin...
Loading the batteries
*Be sure the power switch is OFF.
*Turn the lock screw on the bottom of camera counter clockwise to open the battery cover.
NOTE: If the batteries are replayced while the power
switch is ON, the camera may not resume standard shooting mode. In such a case, perform the reset operation (see p. 12).
*Insert two 3V lithium batteries as shown and replace the cover turning the lock screw clockwise.
WARNING: Do not mix different types of batteries or new and old batteries at the same time.
Use Panasonic CR 123A or Duracell DL 123A, or equivalent.
— 5 —