Is displayed on the LCD panel while | Olympus IS-1 specification

is displayed on the LCD panel while the	— Once the film has been rewound, a blinking "E"
film is rewinding.	and	will be displayed on the LCD panel.
	Further operations are not possible until the

rewound film cartridge is removed.

*Open the back cover, and remove the film cartridge from the camera.

WARNING: Do not touch the shutter curtain inside

the camera while removing the film cartridge

NOTE: If the power is turned OFF while rewinding,

operations will stop. However, rewind mode

is not cancelled. Rewinding will continue when the power switch is turned ON again.

— 11 —

Image 12

Olympus IS-1 manual Is displayed on the LCD panel while

Contents

Instructions Viewfinder Indicators Description of controls Power Focus photography Zoom exposureManual flash operation Auto flash photography Symbols used in this manual Loading the batteries Page Loading the film Open the back cover by sliding the back cover release Align the film leader with the film loading indicator Close the back cover Unloading the film Is displayed on the LCD panel while Reset operation Press the Mode button and + / button simultaneously How to take pictures Press part a to remove the lens cap Set power switch on Or Wide angle Press the shutter release button halfway to focus Frame in the center of the viewfinderPage Macro mode the shooting range 0 ft0 ft 0.6 m 2.0 ft Holding the camera Auto flash photography Press the shutter release button fully to take the picture Auto flash range Color negative film Focus lock Selftimer On the LCD panel will blink Spot metering Position the subject for spot metering withinSpot frame in the center of the viewfinder Modes Macro photography Button to select Telephoto macro 100 mmPage Continuous mode Double exposure mode Page Portrait zoom mode Press the shutter release button fully Size of Head-and-shoulder subject Half-length Full-length9.5 m Night scene mode Use this mode for night time shooting Slow-synchro fill-in flash Zoom memory mode Will blink on the LCD panel for 2.5 seconds, then disappear Auto-S flash photography Button until AUTO-S is displayed on Compose your shot and press the shutter release button fully Scene mode or Portrait zoom mode Fill-in flashPage Exposure mode switching Aperture-preferred auto mode Manual exposure mode While pressing the exposure Mode buttonPress the shift button to set M Manual Exposure mode + Slight overexposure Exposure compensation Power Focus photography Press the button again to cancel PF Power Focus mode Zoom exposure Press the Zoom button to set the focal lengthPage Manual flash operation Aperture setting color negative film How to take better pictures Effects of zoom and its advantages 70 mm Angle of view and depth of field Autofocus AF Subjects that are difficult to focus Automatic exposure mode Program chart Standard photography modeExposure Program chart portrait mode Night scene modeFill-in flash Measuring the amount of light Light meteringSpot metering Exposure compensation and film speed Fixed proper exposureExposure compensation Film speed Flash Flash strengthHigh Function Flash G40 Optional Normal slow-synchro Wide macro TeIe macro= 40 cm optional How to attach the strap Adjust the length of the strap as desired Accessories optional IS/L Lens A-28 Soft case a Troubleshooting Battery powerCamera does not work Displays disappeared while shooting Flash does not emit Camera does not work in extremely cold weatherMy photos look like the film is cracked Care and Storage Specifications Viewfinder information Autofocus frame, spotExposure compensation + / 4 EV compensa Exposure counter Progressive type, displayed on LCD panel Selftimer Electronic selftimer with 12 sec. delay Manual Description of controls LCD panel Olympus Corporation