Manuals / Olympus / Household Appliance / Vacuum Cleaner

Olympus M1200 manual Olympus Switch Panel

Models: M1200

1 45
Download 45 pages 26.89 Kb
Page 24
Image 24
OLYMPUS SWITCH PANEL:

OLYMPUS SWITCH PANEL:

Vacuum #1 – Power from Cord #1. When the switch is turned to the ON position power is supplied to the vacuum motor. (3-Stage Vacuum)

Solution Pump Switch – Power from Cord #2. When the switch is turned to the ON position power is supplied to the solution pump motor. When not using solution (Extracting Only) do not turn this switch ON.

Vacuum #2 – Power from Cord #1. When the switch is turned to the ON position power is supplied to the vacuum motor. (2-Stage Vacuum)

Waste Pump Switch – Power from Cord #2. When switch is turned to the ON position, Waste Pump operation is controlled by the Float Switch in the Recovery Tank. Pump will remain off until water level rises to the point at which the float switch will turn the Waste Pump ON. Do not turn Waste Pump Switch ON unless a hose is connected to the Pump-out Outlet port.

24

Page 23 Page 25
Page 24
Image 24
Olympus M1200 manual Olympus Switch Panel
Page 23 Page 25

FAQ

How do I turn on the power to the vacuum motor?

When the switch is turned to the ON position, power is supplied to the vacuum motor.

When should I not turn on the solution pump switch?

Do not turn the solution pump switch on when not using solution for extracting only.

How does the waste pump operation work?

The waste pump operation is controlled by the float switch in the recovery tank. It will remain off until the water level rises to the point at which the float switch will turn the waste pump on.