Olympus Technical Specifications, M1200 High Pressure Extractor, Vacuum Hose, HP Solution Hose

Technical Specifications

M1200 High Pressure Extractor

Height: 38”

Length: 28”

Width: 19-1/2”

Weight: 141 lbs. Solution Tank Capacity: Recovery Tank Capacity:

Solution Pump:

Vacuum Motors:

Pump-out Pump:

Power Draw:

12gallon

12gallon

Pump-Tec #356 pump with 1-1/2 HP Motor 0-1200 psi – 2.2 gpm

Two AMETEK Lamb 5.7” diameter – tangential discharge One two stage & One three stage – Mounted in series

Little Giant 120VAC 8-20 gpm

Maximum psi 11.4 – Maximum pumping height 26 ft.

Cord #1 – 17.22amp wide open / 11.54amp full load

Cord #2 – 16.25Amp max total (11.25 Pump /5.00 Waste Pump)

Standard Equipment

M1200 High Pressure Extractor

Vacuum Hose:	25’ X 1-1/2” with 1-1/2” cuff & 2” cuff
	4’ x 1-1/2” with 2” cuffs
	Hydro-Filter Inline Filter - AC11
HP Solution Hose:	25’ x 1/4” with 1/4” male / female quick connects
Pump Priming Hose:	12” x 1/4” with 1/4” male quick connect
Auto Fill System with chemical draw:
Metering Tip Kit:	14 different tips for changing chemical dilution rate
Water Supply Hose:	50’ x 3/8” with 1/4” female quick connect &
	female garden hose fitting
Auto Pump-out System:
Pump-out Hose:	50’ x 3/4” with male & female garden hose fittings
Power Cords:	2 – 50’ x 12gauge with male & female plug ends

4