1.Know Your Unit
Storing the Display Unit
Extend the cord and store the display unit as described below.
1.Coil the cord into the display unit holder.
Note: Make sure that the cord does not stick out of the holder and that the cord is coiled evenly.
2.Push the display unit into the holder.
Push the display unit until it clicks into place.
About the Auto Power Off Function
The power will be automatically switched off in the following conditions:
•If the unit is not used within one minute of 0.0 kg appearing on the display.
•If no information is entered for 5 minutes when entering personal data.
•If the unit is not used for 5 minutes after measurement results are displayed.
•5 minutes after the result is displayed when measuring weight only.
12
