2.Inserting and Replacing the Batteries
2. Inserting and Replacing the Batteries
1. Remove the battery cover on the rear side of the main unit.
1) | Press the tab of the battery cover in the | Rear |
| ||
| direction of the arrow to release the |
|
| cover. |
|
2) | After releasing the battery cover, pull the |
|
| tab of the cover upwards. |
|
2.Insert the batteries by aligning them as
indicated.
Make sure that their polarity
3. Close the battery cover.
1) Align the hooks on the battery cover with
the slots in the battery compartment.
2) Push the battery cover until the tab clicks into place.
Battery Life and Replacement | Battery low indicator | |
When the battery low indicator ( | ) appears, replace all four |
|
batteries with new ones. |
|
|
Items stored in memory are retained even if the batteries are removed. However, if the batteries are removed or replaced, you will be prompted to set the date and time the next time the unit is turned on.
• Replace the batteries after turning off the power.
• Disposal of used batteries should be carried out in accordance with the national regulations for the disposal of batteries.
Battery life
•Four AA batteries will last approximately 1 year (when measurements are made four times a day).
•Because the supplied batteries are for trial use only, they may have a shorter life.
EN
13
