Turning on the power

When the CDR-205X is connected to a component system, it has three different states of on or off.

Power on: The ON/OFF switch is depressed (ON) and the remote controller or other system components are not turned off. The STANDBY indicator is turned off.This is the condition for normal operation.

Standby: The ON/OFF switch is depressed (ON) and the remote controller or other system components are turned off. The STANDBY indicator is turned on. When in the standby state, if the remote controller or other system components are turned on, the CDR-205X automatically turns on and system operation begins.

Power off: The ON/OFF switch is released (OFF). In this condition, the CDR-205X will not operate even if the remote controller or other system components are turned on.

Operating the power supply

1 Press in the ON/OFF switch.

ON/OFF

STANDBY

The CDR-205X turns on and the display illuminates.

3 Press the POWER button on the remote controller (press the STANDBY/ON button of the R-805X to turn on the R-805X).

The STANDBY indicator turns off and the CDR- 205X turns on again.

RC-413C

POWER

STANDBY

The STANDBY indicator turns off.

Connections

2 Press the POWER button on the remote controller (press the STANDBY/ON button of the R-805X to put the R-805X in standby).

The standby indicator lights and the CDR-205X enters the standby state.

RC-413C

STANDBY

POWER

4 Press ON/OFF switch to release it.

The CDR-205X turns off.

ON/OFF

STANDBY

Note:

When the ON/OFF switch is in the OFF position, the CD recorder is still consuming some power. If you wish to disconnect your player completely from the mains, withdraw the plug from the AC outlet.

15