Troubleshooting guide

Trouble

Cause

Remedy

The power does

The power cord is not properly

Plug the power cord properly into a mains

not turn on

plugged in.

power supply.

 

 

 

 

The component where the power cord is

Turn on the component into which the

 

plugged into is not turned on.

power cord is plugged.

 

 

 

No sound is

The speakers are not properly

Connect the speakers following the

output from

connected.

procedure given in "Connecting the

the speakers

 

CDR-205X"on page 12.

 

 

 

Cannot record

The components are not properly

Connect the components following the

 

connected.

procedure given in "Connecting the

 

 

CDR-205X"on page 12.

 

 

 

A finalized CD-R or CD-RW is being used.

Use an unfinalized disc (see page 32).

The input switch is not properly set.

Switch to a properly connected input source (see page 20, 22, 24, 26, 28).

The recording level adjustment is set too low.

Adjust the recording level to a proper level (see page 29).

Recorded

The components are not properly

sound is

connected.

distorted

 

Connect the components following the procedure given in "Connecting the CDR-205X"on page 12.

 

Recording is being affected by

Either turn off the television or move the

 

the television.

CDR-205X away from the television.

 

The disc is damaged or cracked.

Use another disc.

 

The recording level adjustment is

Adjust the recording level to a proper level

 

set too high.

(see page 29).

 

The disc is too dirty.

Clean the disc.

 

 

 

Remote controller

The remote controller batteries

Replace all the remote controller batteries

does not work

are dead.

with new batteries (see page 8-9).

 

 

 

 

There is an object between the

Remove the obstructing object (see page 8-9).

 

CDR-205X and the remote controller

 

 

obstructing the signals.

 

The remote controller is being used outside of its operational range.

Use the remote controller within its operational range (see page 8-9).

A track is skipped

The skip play mode is turned on.

Using the SKIP PLAY button,

during playback

 

turn off the skip play mode (see page 39).

A track is not

The skip play mode is turned off.

Using the SKIP PLAY button,

properly skipped.

 

turn on the skip play mode (see page 39).

 

 

 

A recorded

•

The disc was not finalized

CD-R cannot

 

after recording.

be played in

•

The CD-R indicator lights when

normal CD

 

the disc is played with the

players

 

CDR-205X

•Perform the finalization process (see page 32).

44