Adjusting the recording level
Adjusting the recording level for digital recording

You may need to adjust the recording level when recording low digital signal sources such as satellite broadcasts and the like.

1 Verify that "Monitor" is displayed in the front display.

If “Monitor” is not displayed, press the INPUT button to display it.

2 Press the EDIT/NO button.

EDIT/NO

3 Press the YES button.

If you will not adjust the recording level, press the EDIT/NO button again.

Adjusting the recording level for analog recording

1 Verify that "Monitor" is displayed in the front display.

If “Monitor” is not displayed, press the INPUT button to display it.

2 Press the EDIT/NO button.

EDIT/NO

3 Press the YES button.

If you will not adjust the recording level, press the EDIT/NO button again.

4 Using the AMCS dial, adjust the recording level as desired.

The recording level can be adjusted between -∞and +12 decibels.

AMCS

(PUSH TO ENTER)

Adjust so that when the recording level is at its highest, it reaches to a level between -6 to -2 decibels in the front display.

Adjust to between this level.

L

40

20

10

4

2

0

OVER

R

Even if you change the recording level, the monitor sound level from the DIGITAL OUT terminal will not change.

5 After adjusting the recording level, press the YES button.

The new recording level is set.

4 Using the AMCS dial, adjust the recording level as desired.

The recording level can be adjusted between -∞and +18 decibels.

AMCS

(PUSH TO ENTER)

Adjust so that when the recording level is at its highest, it does not reach "OVER" in the front display. If OVER is reached, the sound becomes distorted.

L

40

20

10

4

2

0

OVER

R

5 After adjusting the recording level, press the YES button.

The new recording level is set.

YES

Operations

YES

29