Troubleshooting guide

Messages during recording (continued)

Display

Cause

Remedy

Repair

After recording, the disc was left in

 

the CDR-205X when the power was

 

turned off and the track numbers and

 

recording time data was lost.

While “Repair” is displayed, the CDR-205X is tracing back through the recorded area and repairing the track numbers and recording time data. When the message disappears, finalization of the disc is possible. Depending on the recording amount, this process may take up to 40 minutes.recording time data was lost.

Disc Full

Either the disc is full of recordings or

Use a new disc.

 

99 tracks have been recorded and no

 

 

more recordings can be made on the disc.

 

 

 

 

Pro Disc

A CD-R not for music recording use

 

(without the "FOR CONSUMER" marking)

 

or a CD-RW has been inserted.

Eject the disc and check whether it meets the specifications for use with the CDR-205X. Always insert a disc that has . the markings "FOR CONSUMER" or "FOR MUSIC USE ONLY" on its surface

(see page 10).

Messages during playback

Display

Cause

Remedy

Blank Disc

You have tried to play a disc that has

 

no recordings on it.

If the inserted disc is a CD-R or CD-RW with no recordings, you may record onto it, but it cannot be played.

No Disc

No disc has been inserted.

Open the disc tray and make sure that a

 

 

disc is inserted (see page 16).

Now Setting

The CDR-205X is warming up.

Please wait.

 

 

 

Recovering

This is displayed after the power has been

 

or if the power is accidentally turned off

 

during a recording, the CDR-205X will enter

 

this mode to repair the disc for additional

 

recordings.

Wait until the message disappears (see page 18).

Over

You reached the end of the disc

 

by pressing the search button during

 

playback or while the CDR-205X was paused.

 

 

Information Other

43