Basic Camera Setup: The Setup Menu

iSound Settings

dbutton Mz(Setup menu) (A118) MiSound settings

Adjust the following sound settings.

Button sound

Turn button sound On or Off.

When On (default setting) is selected, a beep will sound once when operations are completed successfully, twice when focus has been locked, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Turn shutter sound On (default setting) or Off.

kAuto Off

dbutton Mz(Setup menu) (A118) MkAuto off

When the camera is on and a specified period of time passes with no operations performed, the monitor turns off and the camera will enter standby mode (A17) to save power. Once the camera has entered standby mode, the power-on lamp will blink, and if no operations are performed for another three minutes, the camera will turn off.

Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.

CCanceling Standby Mode

Cancel standby mode and reactivate the monitor by pressing any of the following buttons.

• the power switch

• the shutter-release button

• the Abutton

• the cbutton

CNote on Auto Off

Regardless of the option selected, the monitor will remain on for three minutes when menus are displayed, a maximum of 30 minutes during slide show playback, and 30 minutes when the AC adapter is connected.

CAuto Off in Projector Mode

Menus Setup and Playback Shooting,

Use the Auto off (A145) option in the projector settings menu to specify the auto off setting for projector mode.

129