Projector Slide Show
Project pictures stored in the internal memory or on the memory card as an automated slide show.
1Press the dbutton on the camera in
projector mode.
The projector menu is displayed on the camera’s monitor.
Projection stops while the projector menu is displayed.
The remote control cannot be used to apply projector mode settings.
2Use the multi selector on the camera to select Start slide show and press the kbutton.
The monitor turns off and the standby screen is projected.
Select Effects, Background music, or Frame intvl and press the kbutton to change slide show settings (A143).
Projector
Start slide show
Effects
Background music
Frame intvl
Exit
projector the Using
142
3Check the camera position and focus with the standby screen.
Follow steps 3 and 4 under “Projecting Pictures” (A137) to adjust camera position and focus.
Start
Loop
4 Press the Hor Ibutton on the remote |
| |
control to select Start and press the Q |
| |
button. |
| |
To repeat the slide show automatically, select Loop |
| |
before selecting Start and press the Qbutton. A check | Start | |
mark (w) will be added to the loop option when | ||
Loop | ||
enabled. |
| |
5 The slide show begins. |
| |
While the slide show is in progress, the following |
| |
operations can be performed with the remote control. |
| |
Press Kto display the subsequent picture or Jto display |
| |
the previous picture. Hold down either button to fast |
| |
forward or rewind the slide show. |
| |
Press the Qbutton to pause the slide show. |
|
During a slide show with Background music, the volume can be adjusted with the g(+) or