Parts of the Camera
Replacing the Remote Control Battery
1
Push the tab in the direction indicated above.
4
Place a new 3V CR2025 lithium battery in the battery holder. Be sure that the “+” mark is facing up.
2 | 3 |
Continue pushing the | Remove the used 3V |
tab and pull the battery | CR2025 lithium battery. |
holder out as indicated |
|
above. |
|
5 |
|
Insert the battery holder |
|
into the remote control. |
|
Introduction
Attaching the Camera Strap
1
2 
3
The projector stand can be attached to the camera strap.
BNote on the Projector Stand
Do not carry the camera by the projector stand attached to the camera strap. Should the projector stand slip off the camera strap, the camera could fall.
7