The Projector Settings Menu

Power Saving

Pbutton (projector mode) Md(Projector menu) Mz(Projector settings menu) M Power saving

This option offers automatic adjustment of projection brightness to save power.

On

Enable power saving mode. Projection may appear slightly darker than when Off is selected.

Off (default setting)

Power saving mode is disabled. When the battery is low, the camera automatically adjusts projection brightness to save power even when Off is selected.

Auto Off

Pbutton (projector mode) Md(Projector menu) Mz(Projector settings menu) M Auto off

When the specified period of time passes with no operations performed in projector mode, the camera ends projection and enters standby mode (A17) to save power. Once the camera has entered standby mode, the power-on lamp will blink, and if no operations are performed for another three minutes, the camera will turn off. Choose the time allowed to elapse before standby mode is initiated when no operations are performed in projector mode from 30 s, 1 min, 5 min (default setting), and 30 min.

CCanceling Standby Mode

•When the camera enters standby mode from projector mode, press the power switch, shutter- release button or cbutton to activate playback mode.

•Press the Abutton to activate shooting mode.

•To resume projection, press the Pbutton again in playback mode or shooting mode.

CNotes on Auto Off

projector the Using

The time allowed to pass before the camera enters standby mode is fixed as follows:

•

During slide show playback with the loop option enabled: 30 minutes

 

•

When the projector menu or projector settings menu is displayed: three minutes

145