Troubleshooting
Problem |
| Cause/Solution | A |
Nikon Transfer does not start | • | Camera is off. | 22 |
when camera is connected. | • | Battery is exhausted. | 22 |
| • USB cable is not properly connected. | 86 | |
| • Camera is not recognized by the computer. | – | |
| • Computer is not set to start Nikon Transfer | – | |
|
| automatically. For more information on Nikon |
|
|
| Transfer, refer to help information contained |
|
|
| in Nikon Transfer. | 85 |
| • Be sure that the computer meets Nikon | ||
|
| Transfer system requirements. |
|
|
|
| |
Pictures to be printed are not | Memory card contains no pictures. Replace the | 20 | |
displayed. | memory card. Remove the memory card to print |
| |
| pictures from the internal memory. |
| |
|
|
| |
Cannot select paper size with | Paper size cannot be selected from the camera if | 91, 92 | |
camera. | the printer does not support the paper sizes |
| |
| used by the camera, or the printer automatically |
| |
| selects the paper size. Use the printer to select |
| |
| paper size. |
| |
|
|
| |
Projected pictures are not | • Projector window is dirty. | 151 | |
sharp. | • The camera is placed too far or too close to | 137 | |
|
| the screen. Adjust the distance between the |
|
|
| camera and the screen. |
|
| • The picture is out of focus. Adjust the focus | 138 | |
|
| with the projector focus slider. |
|
|
|
|
|
Notes Technical
161