Troubleshooting

If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative.

Display, Settings and Power Supply

 

Problem

 

Cause/Solution

A

 

Monitor is blank.

Camera is off.

17

 

 

Battery is exhausted.

16

 

 

Standby mode for saving power: press the power

129

 

 

 

switch, the shutter-release button, the Abutton, or

 

 

 

 

the cbutton.

 

 

 

When flash lamp blinks red, wait until flash has charged.

31

 

 

Camera and computer are connected via USB cable.

85

 

 

Camera and TV are connected via A/V cable.

84

 

 

Monitor turns off during projecting.

137

 

 

 

 

 

 

Monitor is hard to read.

Adjust monitor brightness.

124

 

 

Monitor is dirty. Clean monitor.

151

 

 

 

 

 

 

Camera turns off without

Battery is exhausted.

22

 

warning.

Camera has turned off automatically to save power.

129,

 

 

The camera has become hot due to the heat of the

145

 

 

138,

 

 

 

projector. Leave the camera off until it has cooled

154

 

 

and then turn it on again.

 

 

 

Battery is cold.

150

 

 

 

 

 

Date and time of

Pictures and movies recorded before the clock has

18,

 

recording are not correct.

 

been set will have a time stamp of “00/00/0000

121

 

 

 

00:00” for pictures and “01/01/2009 00:00” for

 

 

 

 

movies. The “Date not set” indicator blinks during

 

 

 

 

shooting. Set the correct time and date from the

 

 

 

 

Date option in the setup menu.

121

 

 

Check camera clock regularly against more accurate

Technical

 

 

timepieces and reset as required.

 

 

 

 

 

No indicators displayed

Hide info is selected for Photo info.

124

 

 

in monitor.

Select Show info.

 

Notes

 

 

 

Date imprint not

Camera clock has not been set.

18,

available.

 

 

121

 

Date not appearing on

The current shooting mode is one that does not

125

 

pictures even when

 

support Date imprint.

 

 

Date imprint is enabled.

Another function that does not support date imprint

110,

 

 

 

is enabled.

125

 

 

 

 

 

Camera settings reset.

Backup battery is exhausted; all settings were restored

122

 

 

to their default values.

 

 

 

 

 

 

156