How to Use External Input Source: VGA/Composite/AV/HDMI/USB Display/WiFi Display
Selecting Input Source Manually
If more than one external devices are connected to the projector or the projector cannot automatically detect the external device. You have to manually select the input source. To do this, perform the following steps below.
1.Select "Input"
VideoMusicPhoto
Input | Office Viewer | Setup |
Press matched symbol to enter specific function directly
Yes No
5.Exit Display Mode
2. Select Input Source
4.Adjust Settings View Source Content
To exit
display mode
Support 3D | Not Support 3D |
|
|
|
|
Zoom in
Volume up
Volume down
Aspect ratio
Not support 3D: Hide button guide
Support 3D: Enter 3D menu
Settings
Return to Home menu
Video
VGA
HDMI
USB Display
WiFi Display
Return to Home menu
3.Enter Display Mode
Display mode
Display
button guide
VGA
800 x 600 60Hz
or
<Note>
The signal message box briefly appears on screen; its label varies depending on the selected input signal.
19
