ENGLISH
Continue
Under this default option, the internal file counter is first set to “0001”. Every subsequent picture is assigned an incremental File Number.
The internal file counter increments by 1 regardless of the media type, unless it is reset.
New
Under this option, the internal file counter to “0001” for new media only. But in case there are picture files already present inside the storage media, it will start counting from the highest file number of the media.
Info. (System Information)
This option allows you to check:
•Camera model number.
•Current version of firmware installed.
Information
DS 6639
VER X.XXA
OK
ENGLISH
It is advisable to set the File Number setting to New only in the following cases:
•Either the internal memory or SD card has been newly formatted (
p.14).
•A completely new SD card has been installed.
Format
Camera Menu
Camera Menu Settings and Options
The options underlined and in italics are initial defaults.
FRANÇAIS
This option will format all data in either the
internal memory 
or the external card
, including all protected image files.
Caution: Do not eject the SD card while the card is being formatted, as this may damage the card.
Formatting deletes all data from the memory device chosen. The images and files will not be recoverable.
Record | Setup | |
File No. | Cont | |
|
|
|
Format |
| IN |
| ||
Reset |
| |
| ||
| ||
LCD Bright |
| |
3/4 MENU Exit 
OK
Settings | Page | Options |
Record Mode | p.15 | Camera or Movie mode Switch between digital still |
selection |
| and motion picture captures. |
|
|
|
Size | p.16 | Super Fine 2048 |
|
| Fine 1600 (2.0 |
|
| Pixel) / Basic 640 (VGA) |
Quality | p.16 | ECO (Economy) / STD (Standard) / HQ (High Quality) |
White Bal | p.17 | Auto / Sunlight / Shade/ Yellow F.L. (Fluorescent Lamp) |
ESPAÑOL
Reset
You can reset all the settings to factory default. Refer to the Setup Menu table to see the defaults for each setting (
p.11).
The reset function can reset all the settings to factory default except for the current time and date.
Record | Setup |
File No. | Cont |
Format 
IN
Reset
LCD Bright
3/4 MENU Exit 
OK
|
| / White F.L. (Fluorescent Lamp) / Tungsten |
Metering | p.17 | Central / Spot / Matrix |
|
|
|
ISO | p.18 | Auto / 50 / 100 / 200 |
|
|
|
Con.Shoot | p.18 | Off / On |
|
|
|
EV | p.19 | +2.0 / + 1.7 / +1.3 / +1.0 / +0.7 / +0.3 / 0.0 / |
|
|
LCD Bright
You can adjust the LCD brightness level to compensate for different lighting conditions, for example.
• | If there is plenty of ambient light such as in |
| bright sunshine, you can adjust the brightness |
| levels higher to make the display easier to see. |
• | If ambient light levels are relatively low such |
Switching Between Camera and Movie Mode
Use the menu to switch between Camera and Movie modes.
Movie Mode
In this mode you can record moving images at 10 frames per second. The duration of the movie will depend on the battery life and memory available.
Record | Setup |
| |
Mode |
|
|
|
Size |
| 1600 |
|
Quality |
| H.Q. |
|
White Bal |
| WB |
|
| AUTO |
| |
1/2 MENU Exit 
OK
as indoors or at night, you can adjust the brightness |
levels lower to make the display easier to see. |
TIP: To maximize battery life, keep brightness
settings low.
14
In Movie mode, you can only adjust the white balance, EV and ISO. In Camera mode, all settings will apply.
15
