Outback Power Systems Press the DC soft key to view the status of the FlexNet DC, Readings

FX Total		12.6V	99%
Inverting			0.000kW
AC Loads			0.000kW
Buying	$		0.000kW

From the MAIN menu, press the <SUM> soft key to view a summary of the system’s operation. This information is a sum of all FlexNet DC data. Press the second soft key to view the next SUM screen

DC BAT		12.5V 99%
Bat	-0.6A	0.000kW
Net	-4AH	00.7kWH
Days Since Full		4.8

MAIN------------------------------

11:30:55A

SUM STATUS SETUP ADV

STATUS choose device:

FX CC DC MAIN

The fourth SUM screen shows:

•Battery voltage

•The current state-of-charge

•Battery readings show the instantaneous amp, amp hour, kilowatt, and kilowatt hour figures. When comparing the amp hours reading to “FULL,” the figure is charge factor compensated.

•The number of days since the battery last met the charge parameters.

Press the first soft key to return to the MAIN screen.

Press the <STATUS> soft key to open the STATUS screen to view the status of either the FX, Charge Controller, or (FLEXnet) DC

Press the <DC> soft key to view the status of the (FlexNet) DC

STATUS/DC/PAGE1 --------------	Press the <METER> soft key to view the (FlexNet) DC meter
STATS	readings.
METER SHUNT BATT TOP

18