Outback Power Systems manual Down UP Reset TOP STATUS/DC/BATT

STATUS/DC/BATT
days	since	charge
parameters		met	5.9
DOWN	UP		TOP

STATUS/DC/BATT battery min today

12.4 vdc

DOWN UP RESET TOP

STATUS/DC/BATT battery max today

12.7 vdc

DOWN UP RESET TOP

STATUS/DC/BATT
temp comp’d batt
setpoint	14.2 vdc
DOWN	UP	TOP

STATUS/DC/BATT
system battery		29 C
temperature
DOWN	UP	TOP

STATUS/DC/BATT
cycle charge
factor	78%
DOWN	UP	TOP

STATUS/DC/BATT
cycle KwHr charge
efficiency	65%
DOWN UP	TOP

STATUS/DC/BATT provides the number of days since the battery last met its charge parameters. Press the <RESET> soft key to restart the timer. Press the <DOWN> soft key to view the next battery status screen.

batttery min(imum) displays the minimum battery voltage since it was last reset by the user. Pressing the <RESET> soft key resets the battery minimum voltage; it also resets automatically at midnight. Press the <DOWN> soft key to view the next battery status screen.

batttery max(imum) displays the maximum battery voltage since it was last reset by the user. Pressing the <RESET> soft key resets the battery maximum voltage; it also resets automatically at midnight. Press the <DOWN> soft key to view the next battery status screen.

temp comp’d batt setpoint shows the temperature compen- sated end of charge volts when a network RTS is part of the system. Press the <DOWN> soft key to continue.

When an RTS is present and the temperature is less than 60 C and greater than10 C, the temperature is displayed in Celsius

(C). Instead of a temperature reading, ### will appear if an RTS is not present, is damaged, or the temperature is less than

10C or greater than 60C. Press the <DOWN>soft key to continue.

cycle charge factor displays the last cycle amp hours removed and amp hours returned (as a percentage). Press the <DOWN> soft key to continue.

cycle KwHr charge efficiency states the last cycle kilowatt hours removed and kilowatt hours returned (as a percentage). Press the <DOWN> soft key to view the next screen.

22