Outback Power Systems manual Installing the FLEXnet DC, FLEXNet DC package includes

The FLEXNet DC package includes:

A. FLEXnet DC

B. Ten-pin wiring plug for shunt, relay		C	D
	and battery connections
C. Six feet of CAT5 cable for HUB connection		E
D. Ten-foot color-coded twisted pair			E
		A
	(TP) cable connects to the battery
E.	Three six-foot, color-coded,
	twisted pair cables for shunt connections
F.	Two #6-32 X 3/8” panhead		B
	machine screws

G. Colored labels identifying shunts

Installing the FLEXnet DC

The FLEXnet DC mounts in a 3/4” DC breaker slot in an OutBack DC breaker bracket installed inside a FLEXware enclosure or previous model OutBack enclosure. To mount the FLEXnet DC inside an OutBack enclosure:

1.Put the system into bypass mode

2.Shut off all AC input to inverters

3.Shut off all PV and DC breakers

4.Disconnect the battery cables at the battery

5.Remove the breaker bracket from its enclosure by removing the four corner screws

6.Remove a DC breaker knockout

FLEXnet DC mounts in a DC breaker slot after removing the breaker knockout

DC breakers off

PV breakers off

7