Manuals / Outback Power Systems / Computer Equipment / Surge Protector

Outback Power Systems FW-SP-250, FW-SP-ACA Figures 12 FW-SP-R and FW-ACA Bracket, FW-SP-R LEDs

Models: FW-SP-ACA FW-SP-R FW-SP-250

1 22

Download 22 pages 12.25 Kb

Page 14

Image 14

The locating pin on the FW-ACA bracket fi ts in this slot

FW-SP-R LEDs

(4) Pass the FW-SP-R wires through the FW- ACA Bracket opening, lining up the locating pin with the slot on the surge protector.

Figures 12: FW-SP-R and FW-ACA Bracket

13

Image 14

Outback Power Systems FW-SP-250, FW-SP-ACA manual Figures 12 FW-SP-R and FW-ACA Bracket, FW-SP-R LEDs

Contents

Includes Mounting and Installation Surge Protector Contact Information About OutBack Power SystemsDisclaimer Warranty Introduction Dear OutBack Customer Outback FLEXware Surge Protector Models Introduction LEDs Electrical Connections and LED IndicatorsFLEXware Surge Protector Specifications Mounting Removing and installing FX M5 hex bolts Tools Required to Install PurposeProcedure Underside screw secures FW-SP-ACA to FX Remove these Two M5 hex bolts from the FX Removing various covers from the FX Preparing and installing the FW-SP-ACA onto an FX FW-SP-ACA slides onto the FX FW-SP-ACA slides down FX slots Screws included secure the FW-SP-ACA to an FX FW-SP-250 FW-SP-250 FW250 to check the placement of wires and components FW-ACA housing Locating pin FW-SP-R Replacement for the FW-SP-ACA or the FW-ACAProcedure Figures 12 FW-SP-R and FW-ACA Bracket FW-SP-R LEDs FW-SP-R installed inside the FW-ACA LED label FW-SP-R Replacement for the FW-SP-250 Securing wires to FX DC terminals Wiring and Connecting the FLEXware Surge Protector FLEXware Surge Protector Wiring Designations System can now be powered up FLEXware Surge Protector Limited Warranty Revision System Owner Surge Protector Limited Warranty RegistrationArlington, WA 19009 62nd Avenue NE +34