(10)Route the FW-SP-ACA wires through to the AC Wiring Compartment and to the battery lugs

FW-SP-ACA slides down FX slots

(11)Insert a bushing into the AC enclosure (it is not critical that this bushing line up precisely with the FW-SP-ACA); if fl exible cable is used instead of an enclosure, appropriate strain relief is required.

Screws (included) secure the FW-SP-ACA to an FX

Figure 7: Top view of FW-SP-ACA installed on an FX

(12)Secure the surge protector’s wiring in the appropriate locations and replace the various plastic covers as per the wiring instructions on page 16.

9

Page 10
Image 10
Outback Power Systems FW-SP-250, FW-SP-R FW-SP-ACA slides down FX slots, Screws included secure the FW-SP-ACA to an FX