Outback Power Systems FW-SP-ACA, FW-SP-250, FW-SP-R Tools Required to Install Purpose, Procedure

FW-SP-ACA

The FW-SP-ACA consists of an FW-ACA with an included surge protector and is installed onto an

FX Series Inverter/Charger.

Underside screw secures

FW-SP-ACA to FX

Phillips screw secures FW-SP-ACA bracket and

surge protector board to the FW-SP-ACA

LEDs

Underside screw secures

FW-SP-ACA to FX

Figure 4: FLEXware Surge Protector-ACA

Tools Required to Install:		Purpose:
•	Slotted screwdriver	• Wiring to the AC wiring block
•	Phillips screwdriver	• Remove and install covers
• 13 mm socket (torque ratchet)		• Securing wires to FX DC terminals
•	Utility knife	• Removing plastic knockouts
• 4 mm Allen wrench		• Removing and installing FX M5 hex bolts

Procedure

Turn off the system’s DC, AC IN, and AC OUT breakers (if available, use BYPASS mode to power any loads).

6