Selecting the input signal

INPUT

HDMI1

HDMI2

HDMI3

HDMI4

COMPONENT

PC

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.

HDMI input terminals in HDMI 1 to HDMI 4.

Component or RGB input terminal in COMPONENT/RGB IN.* PC input terminal in PC IN.

*“COMPONENT” may be displayed as “RGB” depending on the setting of “COMPONENT/RGB-IN SELECT”. (see page 44)

When an optional Terminal Board is installed:

INPUT

HDMI1

 

HDMI2

 

HDMI3

 

HDMI4

Input terminal in Terminal Board

SLOT INPUT

 

 

COMPONENT

When a dual input Terminal Board is installed, “SLOT INPUT A” and “SLOT INPUT B” are

PC

displayed.

Using dedicated buttons for input selection

Press to select HDMI signal terminals in HDMI 1 to HDMI 4.

Press to select component or RGB signal terminal in COMPONENT/RGB IN.

Press to select PC signal terminal in PC IN.

Press to select Input terminal in Terminal Board.

For dual input Terminal Board, you can select either input terminal using A or B button.

Notes:

•Selecting is also possible by pressing the INPUT button on the unit.

•Select to match the signals from the source connected to the component/ RGB input terminals. (see page 44)

•Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The

function that darkens the screen slightly is activated to prevent image retention (see page 63), but this function is not the perfect solution to image retention.

ENTER/

MENU

INPUT

19