Optical image stabilizer lock
In motion picture recording mode, you can further improve optical image stabilization by touching and holding O.I.S. LOCK icon. With this function, you can further reduce the effects of the shake that tends to occur when using zoom.
≥This function can be performed only by touch operation.
F
AO.I.S. LOCK icon
≥Open the LCD monitor before using this function.
≥Set [O.I.S.] to [ON] to switch the image stabilizer to ON.
≥
is displayed while you are touching icon.
≥Optical image stabilizer lock is released when you remove your finger from the icon.
≥Operation icon will disappear when no function is performed for a specific period of time if [DISPLAY] is set to [OFF]. Touch the screen to display it again.
∫Setting to display/not-display the O.I.S. LOCK icon
MENU : [RECORD SETUP] # [O.I.S. LOCK DISPLAY] # [ON] or [OFF]
≥Stabilization may not be possible under strong shaking conditions.
≥To record while moving the unit quickly, release optical image stabilizer lock.
47
VQT3Q78
