Panasonic AG-AC7P operating instructions Problem

Models: AG-AC7P

1 116
Download 116 pages 52.42 Kb
Page 96
Image 96

Problem

“ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” is displayed.

VIERA Link does not work.

When connected by the USB cable, this unit is not detected by the PC.

Check points

The unit has automatically detected an error. Restart the unit by turning off and on.

The unit will be turned off in about 1 minute if the unit is not turned off and on.

Repair is needed if it is repeatedly displayed even if it is restarted. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.

[Setting on this unit]

Connect with a HDMI cable (optional). (l 82)

Press the MENU button, then select [SETUP] # [VIERA Link] # [ON] using the cursor button. (l 82)

Turn the unit off and then back on again.

[Setting on other devices]

If the TV input does not switch automatically, switch the input using the TV remote control.

Check the VIERA Link setting on the connected device.

Please refer to the operating instructions of the connected device.

After re-inserting the SD card into the unit, reconnect the supplied USB cable.

Select another USB terminal on the PC.

Check the operating environment. (l86)

Connect the supplied USB cable again after restarting the PC and turning on this unit again.

96

VQT3Q78

Page 96
Image 96
Panasonic AG-AC7P operating instructions Problem