Panasonic AG-AC7P operating instructions Troubleshooting, Problem

Models: AG-AC7P

1 116
Download 116 pages 52.42 Kb
Page 93
Image 93

Others

Troubleshooting

Problem

This unit cannot be turned on.

This unit does not stay on long enough.

Battery runs down quickly.

This unit is turned off automatically.

A clicking sound is heard when the unit is shaken.

Remaining battery indication is not displayed properly.

This unit cannot be operated though it is turned on.

This unit does not operate normally.

Check points

Charge the battery again to ensure it is sufficiently charged. (l17)

In cold places, the battery using time becomes shorter.

The battery has a limited life. If the operating time is still too short even after the battery is fully charged, the battery has worn out and needs to be replaced.

If the unit turns off when you turn off the power to the TV using the TV remote control, the VIERA Link is at work. If you are not using the VIERA Link, set [VIERA Link] to [OFF]. (l82)

This is the sound of the lens moving and is not a defect.

This sound will no longer be heard when the unit is

turned on and change the mode to or .

The remaining battery capacity indication is an approximation.

If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again.

Remove the battery or AC adaptor, wait about

1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the unit again. (Conducting the above operation while the media is being accessed may damage the data on the media.)

If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.

Item other than the

≥ Calibrate the touch screen. (l 44)

touched one is

 

selected.

 

93

VQT3Q78

Page 93
Image 93
Panasonic AG-AC7P operating instructions Troubleshooting, Problem