Power sources
Charging
The battery does not come ready charged when the portable recorder is purchased. Charge the battery before use.
It is recommended that you keep one extra battery as a spare.
1 Connect the power cable to the AC adapter.
Disconnect the DC cable.
(Battery cannot be charged if DC cable is connected.)
Insert until fully in place.
2 Insert the battery.
Charging lamp [CHARGE]
Align the battery with the mark and insert fully.
■Charging lamp
On: Charging in progress
Off: Charging complete
Flashing: See below
■If charging lamp is flashing
Check that there is no dirt, dust, or other substances attached to the connectors on the battery or AC adapter, and ensure that the adapter has been connected correctly.
•If there is dirt or dust on the connectors, disconnect the power plug from the socket before cleaning.
•If the charging lamp continues to flash, there may be a fault with the battery or the AC adapter. Please consult with the place of purchase.
Depending on the country and region, the actual configuration of the power cable, plug, and power outlet may differ from those shown in these operating instructions.
Description | of parts |
|
|
|
|
Preparation |
|
|
|
(Continued on the next page)
23