Thumbnail operations (continued)
Deleting and protecting clips (OPERATION)
Clips can be deleted or protected.
1 Press the [MENU] button.
Using the setup menus (Page 29)
2 Select [OPERATION], and then press the [ENTER] button or 
.
3 Press 
to select an item, and then press the [ENTER] button.
DELETE: ALL CLIPS:
Deletes all clips.
Select whether or not to delete (YES/NO), and then press the [ENTER] button.
SELECT:
Deletes the selected clips.
Press 
to select a clip, and then press the [ENTER] button to display an orange frame around the selected clip. (Repeat this operation to select multiple clips.)
If you select the same clip again and press the [ENTER] button, the orange frame disappears and the selection is canceled. Press the [SHIFT/EXEC] button, select whether or not to delete (YES/NO) on the confirmation screen, and then press the [ENTER] button.
NO:
Returns to the previous screen.
•Protected clips cannot be deleted.
•If you select [ALL CLIPS] to delete all clips from the memory, the operation may take some time to complete, depending on the size of the clips to be deleted.
INDEX:
YES:
Adds an index to the selected clip.
1)Select and play a clip, and press [ENTER] at the point where you want to add an index.
2)Select [YES] on the confirmation screen, and then press the [ENTER] button. The index is added.
•The point in the clip at which the index is actually added is accurate to within a range of 0.5 seconds.
•To delete an index, select [INDEX] → [YES] in step 3, and then perform the following.
1)Select and play a clip, and then press 
to pause the clip.
2)When you press 
, the pointer moves to a point where an index has been added. Move the pointer to the index that you want to delete, and then press the [ENTER] button.
3)Select [YES] on the confirmation screen, and then press the [ENTER] button.
NO:
Returns to the previous screen.
•It is not possible to add indexes to clips recorded using a consumer camcorder.
•It is not possible to adjust the volume when adding or deleting indexes.
64