Thumbnail screen (continued)
1Thumbnail display status (Page 63) The types of clips displayed as thumbnails appear in this area.
2Repeat playback indicator (Page 61) Displayed during repeat playback.
3Card status display
Displays the SD Memory Card status.
4Battery remaining display (Page 24) Displays the remaining battery capacity.
5Cursor (yellow frame)
Displayed on the currently selected thumbnail.
6Recording mode display
Displays the recording mode if the clip currently selected by the cursor was recorded in PH mode.
7Recording format display
Displays the recording format of the clip currently selected by the cursor.
8Duration display
Displays the recording time of the clip currently selected by the cursor.
9Time display (Page 63)
In accordance with the [DATA DISPLAY] setting in the [THUMBNAIL SETUP] setup menu, displays one of the following: time code at start of clip recording/user information at start of clip recording/time of recording/date of recording/ date and time of recording.
10Clip number
Displayed in order of recording (up to 1000 clips). The numbers of clips that cannot be played back (such as clips of different recording formats) are displayed in red.
To play clips displayed in red, set [PB FORMAT] in the [PLAY SETUP] setup menu to the same format as the recording format. (Page 61)
11
: Clip protect display Displayed on protected clips. (Page 65)
12Indicators
M : Shot mark
Displayed when shot marks have been added. (Page 42)
I : Index
Displayed when indexes have been added. (Pages 42, 64)
: Resume playback display
Displayed on clips for which resume playback is set. (Page 62)
60