■R

REC STOPPED. NOW WRITING.

Video recording has been stopped. Data is now being written onto the card.

REPAIR CLIP?

Do you want to repair clips now?

REC WARNING IRREGULAR FRM SIG.

•Displayed when an abnormality is detected in the signal that is input to the portable recorder when recording SDI input. Recording resumes when the input signal returns to normal. “Resumption of recording” (warning display) can be canceled by pressing the [REC/PAUSE] button.

■S

SD CARD FORMAT? YES NO

Do you want to format the SD Memory Card now? Yes/No

SDI INPUT ERROR. (OTHER FORMAT)

•Displayed when the format of the SDI input signal is different from the recording format of the portable recorder.

SET DATE AND TIME

Set the clock.

■T

THE CLIP IS PROTECTED. PLEASE CANCEL PROTECTION.

The clip is protected. Cancel the protection.

THE RECORDING IS STOPPED (OVER THE LIMITATION)

The recording will stop. (Continuous recording for 12 hours)

THE TC MODE IS CHANGED TO "NDF" NDF is selected as the TC mode setting. (Displayed when [SYSTEM FREQ] is set to [59.9Hz])

THIS BATTERY CANNOT BE USED.

The battery currently inserted into the portable recorder cannot be used.

THIS CARD CANNOT RECORD IN VIDEO MODE.

The card cannot be used for video recording.

THUMBNAIL DATA ERROR IS DETECTED.

An error has been detected in the thumbnail information.

■U

UNABLE TO FORMAT.

The card cannot be formatted.

■W

WRITE PROTECT

The card is write-protected.

Error displays

The following messages are displayed when an error occurs in the portable recorder or the SD Memory Card. If the problem is not solved by switching the power off and back on again, either change the card in accordance with the instructions displayed, or consult the place of purchase.

■C

CANNOT RECORD

Displayed when an error has occurred during recording.

■R

REC WARNING

Displayed when an error has occurred during recording. Start the recording again. If the message appears again, consult the place of purchase.

• Switch the power off if the message continues to appear. Try inserting a different SD Memory Card if the message appears again after restarting recording.

■S

SYSTEM ERROR

TURN POWER OFF

Displayed when an error has occurred in the

 

system. Switch the power off and back on again.

 

• If this error is displayed when accessing the SD

 

Memory Card, such as when deleting a clip, the

 

SD Memory Card may be damaged. Replace it

Displays

with a new SD Memory Card.

 

• If this error is displayed when repairing the

 

SD Memory Card, use the AVCCAM Restorer

 

content repair software. (Page 34)

 

• When the AG-HCK10G camera head is

 

 

connected, displayed when the camera cable

 

is removed with the power on. First turn off the

 

power, then remove the camera cable.

 

■When the camera head is connected

 

 

 

 

 

When the AG-HCK10G camera head (optional) is connected and recording is in progress, displayed when an abnormality is detected. Turn the power on again.

FOCUS NG

TURN POWER OFF (error in focus operation)

PSD NG

TURN POWER OFF (error in camera shaking detection)

ZOOM NG

TURN POWER OFF (error in zoom motor)

77