•The remaining battery capacity display is a guideline and may change according to usage conditions.

•The remaining battery capacity display will momentarily disappear when switching between modes or changing the LCD brightness, because the capacity is recalculated at these times.

•Not displayed when using the AC adapter.

•You can switch between displaying and not displaying this information by selecting [CARD & BATTERY] → [ON] or [OFF] in the [DISPLAY SETUP] setup menu.

28Repeat playback display (In PB mode: Page 61)

Displayed when [REPEAT PLAY] → [ON] in the [PLAY SETUP] setup menu is selected.

29Operation status display (In REC mode)

REC:Recording

PAUSE (green): Recording standby

PAUSE (red): Recording paused

•Displayed when an error occurs in the input signal during recording.

•When the input signal returns to normal, the recording restarts.

•When the [REC/PAUSE] button is pressed, the display changes to green.

CHK: REC CHECK in progress

(In PB mode)

:

 

 

Playback

:

 

 

Playback paused

INDEX [

]:Playback paused at index position

(

):

Frame-by-frame playback

 

 

 

 

(Frame-by-frame reverse

 

 

 

 

playback)

 

(

 

):

Next clip (Previous clip)

 

 

(

 

):

Fast forward playback

 

 

 

 

(Approximately 5 times the

 

 

 

 

speed∗)(Rewind playback

(Approximately 5 times the speed∗))

∗Approximately 6 times normal speed when the [PB FORMAT] is set to 720/24P.

(): Fast forward playback (Approximately 15 times the speed∗)

(Rewind playback (Approximately

15times the speed∗))

∗Approximately 20 times normal speed when the [PB FORMAT] is set to 720/24P.

(): Paused in final scene (paused in initial scene)

30Input signal display

SDI: Displayed when in SDI mode.

•The display flashes when recording cannot be performed, such as when the input signal and recording format are different.

CAM: Displayed when in CAM mode.

•Flashes if the camera head has an abnormality, such as a malfunction or broken cable.

INT: Displayed when [INT SG] → [ON] in the [RECORDING SETUP] setup menu is selected. (Page 84)

•You can switch between displaying and not displaying this information by selecting [OTHER DISPLAY] → [ON] or [OFF] in the [DISPLAY SETUP] setup menu.

31 Recording function display

P-:Displayed when PRE REC is set. (In CAM mode: Page 49)

A-:Displayed when [AUTO REC] in the [RECORDING SETUP] setup menu is set to something other than [OFF]. (In SDI mode: Page 84)

32 Audio output adjustment level display

 

(Page 68)/Microphone input adjustment

 

level display (Page 47)

 

When the [AUDIO MON/ADV] button is

 

pressed, the sound volume output from

 

the built-in speaker and headphone jack is

 

displayed.

 

During input audio level adjustment, “I.MIC” or

 

“E.MIC” is displayed instead of “VOLUME”.

Displays

33 Safety zone

 

The range is displayed in accordance with the

 

[SAFETY ZONE] (Page 88) setting in [DISPLAY

 

SETUP].

 

 

When [4:3] is selected:

 

This displays the positions for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4:3 cropping.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When [90%] is selected:

 

This indicates the range

 

 

 

 

 

 

 

 

 

 

 

 

(90 %) that can be displayed by

 

 

 

 

 

 

 

 

 

 

 

 

 

 

an ordinary home-use television.

 

 

 

 

 

 

 

 

 

 

 

 

• When “EXPANDED” is displayed because

 

the focus assist function of CAM mode is

 

being used, the safety zone is not displayed

 

on the LCD monitor screen.

 

(For using focus assist, see page 46.)

 

75