Troubleshooting

Power supply

There’s no power.

Make sure the battery and AC adapter are connected properly.

P25

 

Check the connections again.

 

Power goes off for no

To prevent the battery from running down needlessly, the portable

P92

apparent reason.

recorder automatically turns off when it has been left in the shooting

 

 

pause mode for more than 5 minutes.

 

 

Check [POWER SAVE] in the [OTHER FUNCTIONS] setup menu.

 

Power goes off as soon as

The battery may have run out.

P24

it is turned on.

If the remaining battery charge display is blinking or

 

 

 

 

 

appears, the battery has run out.

 

 

Either recharge the battery or replace the discharged battery with a

 

 

fully charged one.

 

Battery

The battery runs down

Make sure the battery is fully charged.

P23

quickly.

Keep charging until the AC adapter’s CHARGE lamp goes out.

 

 

Are you using the battery in a cold place?

 

 

 

The battery is affected by the ambient temperature. Its operating

 

 

time is reduced in low-temperatures.

 

 

The battery may have reached the end of its service life. The

 

 

 

battery will become unchargeable. The battery has a certain

 

 

 

service life which varies depending on how the battery is used. If

 

 

 

the battery operates only for a short period even when it is charged

 

 

 

adequately, it has reached the end of its service life.

 

The battery cannot be

The battery cannot be charged if the DC cable is connected.

P23

charged.

 

Disconnect it.

 

The remaining battery

The remaining battery capacity display is merely a guideline. To

capacity is not displayed

 

ensure that remaining battery capacity is displayed correctly, use

 

correctly.

 

the battery completely from a fully-charged state, and charge

 

 

 

the battery again. (Remaining battery capacity may still not be

 

 

 

displayed correctly if the battery has been used for long periods in

 

 

 

high or low temperatures, or if the battery has been recharged a

 

 

 

large number of times.)

 

Shooting

Cannot start shooting.

Make sure that the power is on.

P26

Cannot focus automatically.

Make sure that the unit is not in manual focus mode.

P50, 83

 

 

When auto focus mode is selected, focusing is performed

 

 

automatically.

 

 

You may be shooting a scene where it is difficult to bring the

 

 

 

subject into focus in the auto focus mode. If this is the case, use the

 

 

 

manual focus mode.

 

 

 

It may be hard to bring the subject into focus when

 

 

 

·

both close and distant objects are shot at the same time

 

 

 

·

shooting through a dirty window

 

 

 

·

shooting in a dark place

 

 

 

·

there are sparkling or shiny objects around the subject

 

 

 

·

the subject is moving fast

 

 

 

·

shooting a scene with minimal contrast

 

Cannot focus while

Sometimes when focus control is in the macro range, the zoom

P74

zooming.

 

position is at the wide end or telephoto end, and the camera cannot

 

 

 

focus while zooming.

 

94