Shooting and recording with a camera (CAM mode)
When connected to the
Portable recorder
CAMERA terminal
| |
camera head |
|
(optional) | Camera cable (optional) |
1 Connect the portable recorder to the camera head with the camera cable, and press the [POWER] button for 2 seconds or longer to turn on the power.
The CAM mode screen appears.
Indicates the mode
TC 12 : 34 : 56 . 00 CAM 
120 min
112 min |
| |
PH 1080 |
| ATW |
60 |
| |
|
| 0dB |
ALC |
|
|
24P | 1/60 | AF 99 |
H 1 | F F5.6 | Z00 |
C | ||
H 2 | ||
C |
|
|
•If you turn on the power before connecting the camera head, the portable recorder will enter SDI mode and it cannot be changed to CAM mode. If you connect or disconnect the camera head while the portable recorder’s power is on, it may cause a malfunction of the portable recorder or camera head. Be sure to turn off the portable recorder’s power before connecting or disconnecting the camera head.
•If the camera head has an abnormality, such as a malfunction or broken cable, recording is not possible. “SYSTEM ERROR TURN POWER OFF” is displayed on the LCD monitor screen and “CAM” flashes.
2 Press [MENU]. |
| |
Recording | ||
Using the setup menus (Page 29) | ||
| ||
3 Select [RECORDING SETUP] → [REC |
| |
FORMAT], and then press the [ENTER] |
| |
button or . |
|
4 Press 
to select the recording format, and then press the [ENTER] button.
•The factory default setting for this unit is as follows.
For
For
5 Press the [REC/PAUSE] button to start shooting.
•Shooting is not possible when a menu screen is displayed. First close the menu screen, and then press the [REC/PAUSE] button.
•The default setting for focus, iris and shutter speed adjustment is auto. To change the settings, see page 50.
•In CAM mode (when connected to AG- HCK10G camera head), no audio is output from the
6 Press the [REC/PAUSE] button to finish shooting.
•The portable recorder enters shooting standby.
(Continued on the next page)
37