Setting the date and time/Recharging the built-in battery/Adjusting the LCD monitor (continued)

•Slight time errors may occur, so check that the time is correct before recording.

•When using the recorder overseas, do not set the [CLOCK SET] time to the local time, but instead enter the time difference from Greenwich Mean Time in [TIME ZONE]. (Page 92)

Recharging the built-in battery

The recorder’s built-in battery saves the date and time.

When “LOW INTERNAL BATTERY” is displayed even when the date and time are set, it means that the built-in battery is low. Recharge using the following procedure.

Reset the date and time after the battery is fully recharged.

1 Connect the AC adapter to the portable recorder. (Page 25)

• Leave off the power of the portable recorder.

Adjusting the LCD monitor

1 Press the portable recorder’s [POWER] button for 2 seconds or longer to turn on the power. (Page 26)

2 Press the [MENU] button. Using the setup menus (Page 29)

3 Select [DISPLAY SETUP] → [LCD SET] → [YES], and then press the [ENTER] button.

4 Press to select an item, and then press the [ENTER] button.

2 Leave the portable recorder like this for about 4 hours.

•The built-in battery recharges during this time.

•Check the time code and menu operations after recharging.

If the date and time are still not memorized after recharging, the built-in battery must be replaced. Consult the place of purchase.

LCD COLOR LEVEL: Adjusts the color density of the screen.

LCD BRIGHTNESS: Adjusts the brightness of the

screen.

LCD CONTRAST: Adjusts the contrast of the screen.

•Be careful because if all the LCD monitor adjustment values are set to their lowest levels, it becomes difficult to see the menu screens.

5 Press to set the item value, and then press the [ENTER] button.

6 Press the [MENU] button to close the menu.

32