Installation

(The installation work must be performed by your dealer without fail.)

O Attaching the chain

1.Attach one end of the chain to the pan-tilt head using a chain attachment screw (M4a8 mm: with flat washer/spring washer).

2.Position the other end of the chain over the screw hole on the top of the camera and attach it using a chain attachment screw (M4a6 mm: with flat washer/spring washer).

<Notes>

O Be sure to tighten all screws firmly with a screwdriver or similar tool.

O When the hole on the camera is M2.6, attach the chain with the M2.6a6 mm (with flat washer/spring washer) chain attachment screw.

O When using the AW-E800A camera, the mounting spacer must be attached to the top panel of the camera before attaching the chain. Position the end of the chain over the hole on the mounting spacer and attach it using a chain attachment screw (M4a6 mm: with flat washer/spring washer).

Be sure to tighten the mounting spacer and all screws firmly with a screwdriver or similar tool.

This chain is for use with the AW-E300, AW-E600 and AW-E800A convertible cameras. It cannot be used with any other camera.

When attaching any other camera to the pan-tilt head, carefully check the pan-tilt head operation and that appropriate measures have been taken to ensure the camera does not fall.

Chain attachment screw

M4a6 mm or M2.6a6 mm: with flat washer/spring washer

Chain attachment screw

M4a8 mm:

with flat washer/spring washer

With the AW-E800A

Chain attachment screw

M4a6 mm:

with flat washer/spring washer

Mounting spacer

(included with the AW-E800A)

Chain attachment screw

M4a8 mm:

with flat washer/spring washer

Chain

Chain

Chain attachment screw

M4a8 mm:

with flat washer/spring washer

Chain

16