Installation
(The installation work must be performed by your dealer without fail.)
O Mounting a camera
When mounting a camera to the
1.Place the camera on the camera mounting base and insert the guide pin into the guide hole on the camera.
2.Tighten the 2 camera mounting screws to fix the camera firmly in place.
3.After mounting the camera, check that it is firmly attached and that there is no play.
<Notes>
O Be sure to tighten all screws firmly with a screwdriver or similar tool.
O When there is only 1 hole on the camera, remove the 2 camera mounting screws from the camera mounting base, then insert 1 camera mounting screw into the center hole on the camera mounting plate and tighten it to fix the camera in place.
Camera guide pin
Camera mounting
Screw
Camera mounting Screw
O Adjusting slack in the chain |
|
The chain length allows for some |
|
degree of slack. |
|
Remove any slack after attaching the |
|
camera to the |
|
the chain around as shown in the figure |
|
at right, then firmly tighten the screw to | With the |
fix it in place. |
|
17