Examples of connections

3.When controlling the camera and pan-tilt head using the AW-RP605 multi-function controller and transmitting SDI signals

Printed circuit board

Genlock signals must be supplied when

switches:

SDI settings

Pan-tilt head cable:

AW-CA50T29

Coaxial cable:

BELDEN 8281

more than one camera and pan-tilt head are to be used.

Coaxial cable:

Color monitor

BELDEN 8281, max. 656 feet (200 meters)

SDI IN

Coaxial cable:

 

BELDEN 8281, max. 3,280 feet

 

(1,000 meters)

Multi-Function Controller:

Pr/SDI OUT

AW-RP605

G/L IN

 

CONTROL IN IP/RP

10BaseT straight cable:

UTP category 5, max. 3,280 feet (1,000 meters)

G/L OUT

 

REMOTE

Cable with a nominal cross

 

section of 1.25 mm2 or more

CONTROL OUT TO

max. 98.4 feet (30 meters)

PAN/TILT HEAD

O I

 

AC adapter:

Personal computer

AW-PS300

(Windows)

O Use the camera/pan-tilt head connecting cable (AW-CA50T29) to connect the pan-tilt head with the convertible camera in which an SDI card (AW-PB304), etc. has been installed.

O Set the printed circuit board switches to the SDI settings.

O Use a coaxial cable (BELDEN 8281) to connect the SDI OUT connector on the convertible camera with the SDI IN connector on the pan-tilt head. Select the coaxial cable of a length at which the pan-tilt head will operate smoothly.

O Use a coaxial cable (BELDEN 8281) to connect the Pr/SDI OUT connector on the pan-tilt head with the SDI IN connector on the color monitor.

O Use a 10BaseT straight cable (UTP category 5) to connect the CONTROL IN IP/RP connector on the pan-tilt head with the CONTROL OUT TO PAN/TILT HEAD connector on the controller.

O Check that the pan-tilt head and camera can be controlled using the controller.

25