Installation precautionsO Avoid using the pan-tilt head in kitchens or other places where there is excessive steam and oil fumes.
O Make sure that the installation of the pan-tilt head has been completed before mounting the camera onto it.
O This pan-tilt head has a maximum load capacity of 8.8 lb (4 kg). Do not use it for loads over 8.8 lb (4 kg).
O Do not use a lens that will cause the camera to be poorly balanced. Such a lens should not be used even if the load capacity is under 8.8 lb (4 kg).
O Do not install the pan-tilt head outdoors or in any place where the temperature is over 113°F (45°C) or below 14°F (–10°C).
Further, it should be used where the ambient humidity is less than 90%.
O Screws for mounting the pan-tilt head are not provided with the stand and must therefore be purchased separately.
They should be selected with due consideration given to the location where the pan-tilt head is to be mounted and its load capacity.
O To supply power to the pan-tilt head, use only the AC adapter (AW-PS300) designed for use with this pan-tilt head.
O When handling the pan-tilt head, be sure to hold it by the base. Do not lift the pan-tilt head by the head or tilting arm.
Doing so may cause the unit to malfunction. O Do not turn the head or tilting arm by hand.
Doing so may cause the unit to malfunction.
O Dropping the pan-tilt head or subjecting it to a strong shock may cause malfunctioning or an accident.
O Install the pan-tilt head so that a clearance of at least one meter is left around the monitor.
O When mounting a camera onto the pan-tilt head, take due care to prevent the camera from slipping out of position or dropping.
O Install the pan-tilt head and set the limiters so as to ensure that none of the components mounted on the pan-tilt head or cables will make contact with any other objects in the vicinity when the pan-tilt head rotates.