
Limiters
$Setting the limiters
O Setting the upper limit position of the travel range
1.Using the controller, tilt the camera to the position which is to serve as the upper limit.
2.While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 47 .
3.The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.
4.Using the controller once again, check whether the upper limit position has been set correctly.
O Setting the lower limit position of the travel range
1.Using the controller, rotate the camera to the position which is to serve as the lower limit.
2.While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 46 .
3.The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.
4.Using the controller once again, check whether the lower limit position has been set correctly.
O Setting the
1.Using the controller, rotate the camera to the position which is to serve as the
2.While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 44 .
3.The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.
4.Using the controller once again, check whether the
O Setting the
1.Using the controller, rotate the camera to the position which is to serve as the
2.While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 45 .
3.The setting is completed as soon as the lamp of the TRACING/PRESET MEMORY button 41 [LIMIT ON] comes on.
4.Using the controller once again, check whether the
30