
Connections
$Setting the printed circuit board switches
The switches on the COMP and CONNECTOR printed circuit boards must be set to correspond to the signals to be transmitted and components to be connected to the
(When shipped, the analog settings are supported.)
RET | ON | SDI |
PB | OFF | PR |
O Analog settings
SDI/PR switch | : Pr | |
WEB/1394 switch | : | 1394 |
WEB/RP422 switch | : | RP422 |
O SDI settings
SDI/PR switch | : SDI | |
WEB/1394 switch | : | 1394 |
WEB/RP422 switch | : | RP422 |
O WEB settings
SDI/PR switch | : Pr |
WEB/1394 switch | : WEB |
WEB/RP422 switch | : WEB |
COMP switch
Use this at the ON position if the length of the cable exceeds 1,640 feet (500 meters).
SDI/PR switch
RET/PB switch
Do not change the setting of this switch – use it at the PB position.
COMP printed circuit board
WEB/1394 switch
WEB 1394
WEBRP422
WEB/RP422 switch
CONNECTOR printed circuit board
22